Lancia all wheel drive explained

All Wheel Drive
...Explained
...Safety Concerns
...Quattro Evolutions
...xDrive
...Torsen
...Haldex
...Super Select
...Torque-Vectoring AWD
...Viscous Coupling
...Differential
...Torque Split Ratio NEW!

Vehicles
...Acura
...Alfa-Romeo
...Audi
...BMW
...Bucher
...Bugatti
...Cadillac
...Chevrolet
...Citroen
...Fiat
...Ford Europe
...Ford USA
...Honda
...Hummer
...Hyundai
...Isuzu
...Jaguar
...Jeep
...Kia
...Lada
...Lamborghini
...Lancia
...Land Rover
...Lexus
...Lincoln
...Mazda
...Mercedes-Benz
...Mitsubishi
...Nissan
...Opel
...Peugeot
...Porsche
...Renault
...Saab
...Seat
...Skoda
...Subaru NEW!
...Suzuki
...Toyota
...Vauxhall
...Volkswagen
...Volvo

Videos NEW!

Testdrive

Translate this site

Search this site

Custom Search

Have something to add or noticed a mistake? Leave a comment!

Lancia

Lancia Delta HF - Full-time all wheel drive.

Transmission type

Full-time all wheel drive with centrally-mounted epicyclic torque converter and Ferguson viscous joint; Torsen-type rear differential with 5 to 1 wheel torque ratio

Three differentials are at the heart of the system. Drive to the front wheels is linked through a free-floating differential; drive to the rear wheels is transmitted via a 56/44 front/rear torque-splitting Ferguson viscous-coupling-controlled epicyclic central differential. The real innovation as far as production cars are concerned however, lies between the rear wheels.

The Torsen (torque sensing) rear differential is similar to that found on McLaren Formula 1 cars. The result of combining these differentials in this configuration is an automatic-thinking four-wheel-drive system which requires no manual input from the driver, yet ensures maximum potential traction at any given time.

The Torsen differential is a true 'intelligent' differential in the way it distributes torque. It divides the torque between the two wheels according to the grip available and it does it without ever locking fully; maximum lockup is 70 per cent.

Standard differentials are either free-floating or self-locking. Free-floating systems are good at differentiating between wheel speeds on bends, but always supply the same amount of torque to both wheels. In this situation, however, there is a risk that the wheel with the lighter load (on an incline, for example) or less grip, will lose traction. To counteract this possibility, totally self-locking differentials ensure that both wheels rotate at the same speed but in doing this, prevent free differentiation in cornering, to the detriment of handling and stability.

	Lancia Delta HF 4x4	8 valve HF Integrale	16 valve HF Integrale
Final drive ratio	2.944:1	3.111:1	3.111:1
Torque split front	56%	56%	47%
rear	44%	44%	53%

Figure: Lancia Delta HF 4wd

Figure: Lancia Delta HF Integrale rear TorSen locking differential (lower left), viscous coupling(2) locking planetary gear center differential(1) (lower right). On the top - manually locking rear differential for Integrale?? (what year?)

Lancia Delta / Lancia Dedra / Fiat Tempra / Alfa Romeo 155 -

Figure: Lancia Delta / Lancia Dedra / Fiat Tempra / Alfa Romeo 155 4wd power distribution unit. Planetary center differentical is located on the left, near the left driveshaft. Viscous coupling is located on the right side near the right driveshaft.

Figure: Lancia Delta / Lancia Dedra / Fiat Tempra / Alfa Romeo 155 4wd power distribution unit. 100% of the power goes to the planetary center differential (red), from there, the power is distributed between the front axle (yellow) and the rear axle (blue). When slipping occurs, the viscous coupling locks the front and rear shafts together. The engine is rotating the outer gear of the planetary gear center differential. Power to the front wheels is taken from the sun gear (center gear). Power to the rear wheels is taken from the planet gears (the smallest gears in the middle).

Figure: Lancia Delta / Lancia Dedra / Fiat Tempra / Alfa Romeo 155 4x4 center differential unit.

Lancia Delta S4 - ?

Figure: Lancia Delta S4 four wheel drive

Lancia y10 4wd - Part-time all wheel drive. Button-operated. Vacuum-operated rear axle disconnect system. When in 2wd mode, the driveshafts are disconnected from the transfer box and from both rear wheels.

Last updated: 2010-02-19 23:42

There are no comments yet